SOLAR VIZOR UV flyscreen
Instructions for use


  • The wrinkles in the mask that may have been caused by the packaging will quickly smooth out due to your horse’s body heat. However, if they remain stubborn, remove the mask from the horse and gently heat the folds with a hair dryer. This way they can be smoothed out.
  • Adjust the halter of the mask when your horse is standing upright. Because if you attach the mask when the animal’s head is stretched forward and lowered, it will be too loose when the horse stands up.  Then the horse could get stuck somewhere with the mask or strip it off. We recommend that you observe your pet for a while when it first wears the mask. This ensures that the mask fits properly in all situations.
  • After you adjust the mask’s halter, it should fit snugly – no more than one finger should fit between them. Then cut the remaining ends of the halters and seal them with a little glue or wax. Overhanging halters are a favorite toy for other horses. You could tear your horse’s mask off like this . For this reason, halter ends that are too long should not simply be folded and hidden in the mask ! 
  • Once the mask has been fitted, we strongly recommend cutting off the excessively long ends of the ribs. Seal the ends with wax, glue or similar. Pull the end of the strap through the clip again so that it is now on the inside of the face :
  • Regularly check your horse’s eyes and face and clean the visor.

Cleaning and maintenance

  • Rinse it with a hose or wash it by hand with mild liquid soap. Rinse it well and let it air dry only.
  • Check the fencing: check regularly for sharp edges. This could result in a mask becoming snagged or jammed. A simple solution is to apply tape along the top of this type of fence. It helps reduce the risk of a mask getting caught or rupturing .
  • Replacement quick release clips: Clips can be purchased on our website